“TOTAL MOISTURE CONTROL” DECO 20 CONCRETE SEALERS & COATINGS
NON HAZARDOUS
NO SOLVENTS

DECO NORTHEAST 2019

CONTRACTORS

Requires only one application Grey in color Pre-mixed one gallon packaging Use to fill in voids and honeycombing Easy skim coat application, saves labor Totally water based
Tested By SGS U.S. Testing Company Contains anti fungal ingredients Contains rust inhibitors Can be applied to dry or damp walls Can be painted or coated over Non Toxic, Non Flammable
BENEFITS
DECO 20 TIE PATCH DECO TIE PATCH was designed for the prevention of water intrusion from the form ties that were removed and/or broken off to meet the ICC requirements which states: “any holes and recesses resulting from the removal of form ties shall be sealed with a bituminous material or other approved methods or materials”.
Excellent for interior applications Can be painted or coated Unaffected by ultraviolet rays Air or airless sprayer applied No mixing, ready to use 5 gallon packaging Use as capillary break on footing Good for walls, slabs, garage floors
BENEFITS
Approved by the International Code Council No grade-line problems as associated with tar DRIES CLEAR, non-yellowing, no odor Dries in 4 to 6 hours, no backfill interruptions Easy to apply, eliminates scheduling problems Can be applied to dry or damp walls Only one application required Excellent intercoat adhesion
DECO 20 - CLEAR PENETRATING CONCRETE SEALER DECO 20 Clear Penetrating Concrete Sealer (DECO 20) is an alternative material replacing bituminous products. It is approved for dampproofing of masonry block, pre-cast and poured concrete foundation walls. DECO 20 is special formulated clear penetrating sealer designed for the environ- mental requirements in the damp-proofing industry. DECO 20 produces a highly effective breathable moisture barrier, by reducing water vapor transmission.
Approved by the International Code Council Exceeds 2015 IBC, IRC and BOCA codes Only 15 mil wet application required Can be sprayed, rolled or brushed on Non-Toxic/Non-Hazardous/Non-Flammable No solvents and extremely low VOC’s Easy application, great coverage area Packaged in 5 gallon pails and 55 gallon drums
Can be applied directly to damp walls Can be applied to top of foundation walls No grade-line problems associated with tar Only one application required Dries gray, no odor Surface cure within 6 to 8 hours Can be painted over coating Continuous coating, eliminates seams
BENEFITS
DECO 20 - DAMPPROOF COATING DECO 20 Dampproof Coating is an approved dampproof material used as an alternative to bituminous and asphalt based coatings. DECO 20 Dampproof Coating is designed to prevent moisture intrusion in poured concrete, cast in place, parged and non- parged block, pre-cast and ICF basement foundations. .
Approved by the International Code Council Exceeds 2012 IBC, IRC and BOCA codes Non-Toxic/Non-Hazardous/Non-Flammable No solvents and extremely low VOC’s Reduces potential mold growth Will stop water leaks in nonstructural cracks Can be sprayed above grade for 100% protection Continuous coating, eliminates seams
Can be applied from footing to top of wall Can be applied to damp walls Can be painted over, standard color is gray Allows for better curing of concrete walls Can be sprayed, rolled or brushed on Only 30 mil wet application required Eliminates the need for 6 mil poly Good for ICF basement foundations
BENEFITS
DECO 20 SEAL - WATERPROOFING MEMBRANE DECO 20 Seal Waterproofing Membrane is an advanced hybrid acrylic resin coating that is specifically designed for the demanding requirements of waterproofing parged and non-parged masonry, pre-cast and poured concrete foundation walls. DECO 20 Seal Waterproofing Membrane is designed for use as a waterproofing coating when hydrostatic pressure caused by the water table does exist.

DECO NORTHEAST LLC

DECO PRODUCTS INC

Concrete Sealers & Coatings

“TOTAL MOISTURE CONTROL” DECO 20 CONCRETE SEALERS & COATINGS

DECO NORTHEAST 2019

NON HAZARDOUS
NO SOLVENTS

CONTRACTORS

Approved by the International Code Council Exceeds 2012 IBC, IRC and BOCA codes Non-Toxic Non-Hazardous Non-Flammable No solvents and extremely low VOC’s Reduces potential mold growth Will stop water leaks in nonstructural cracks Can be sprayed above grade for 100% protection Continuous coating, eliminates seams
Can be applied from the footing to the top of the wall Can be applied to damp walls Can be painted over, standard color is gray Allows for better curing of concrete walls Can be sprayed, rolled or brushed on Only 30 mil wet application required Eliminates the need for 6 mil poly Good for ICF basement foundations
Approved by the International Code Council Exceeds 2015 IBC, IRC and BOCA codes Only 15 mil wet application required Can be sprayed, rolled or brushed on Non-Toxic Non-Hazardous Non-Flammable No solvents and extremely low VOC’s Easy application, great coverage area Packaged in 5 gallon pails and 55 gallon drums
Can be applied directly to damp walls Can be applied to top of foundation walls No grade-line problems as associated with tar Only one application required Dries gray, no odor Surface cure within 6 to 8 hours Can be painted over coating Continuous coating, eliminates seams
DECO 20 - CLEAR PENETRATING CONCRETE SEALER DECO 20 Clear Penetrating Concrete Sealer (DECO 20) is an alternative material replacing bituminous products. It is approved for dampproofing of masonry block, pre-cast and poured concrete foundation walls. DECO 20 is special formulated clear penetrating sealer designed for the environmental requirements in the damp-proofing industry. DECO 20 produces a highly effective breathable moisture barrier, by reducing water vapor transmission.
Excellent for interior applications Can be painted or coated Unaffected by ultraviolet rays Air or airless sprayer applied No mixing, ready to use 5 gallon packaging Use as capillary break on footing Good for walls, slabs, garage floors
Approved by the International Code Council No grade-line problems as associated with tar DRIES CLEAR, non-yellowing, no odor Dries in 4 to 6 hours, no backfill interruptions Easy to apply, eliminates scheduling problems Can be applied to dry or damp walls Only one application required Excellent intercoat adhesion
DECO 20 TIE PATCH DECO TIE PATCH was designed for the prevention of water intrusion from the form ties that were removed and/ or broken off to meet the ICC requirements which states: “any holes and recesses resulting from the removal of form ties shall be sealed with a bituminous material or other approved methods or materials”.
Requires only one application Grey in color Pre-mixed one gallon packaging Use to fill in voids and honeycombing Easy skim coat application, saves labor Totally water based
Tested By SGS U.S. Testing Company Contains anti fungal ingredients Contains rust inhibitors Can be applied to dry or damp walls Can be painted or coated over Non Toxic, Non Flammable
DECO 20 SEAL - WATERPROOFING MEMBRANE DECO 20 Seal Waterproofing Membrane is an advanced hybrid acrylic resin coating that is specifically designed for the demanding requirements of waterproofing parged and non-parged masonry, pre-cast and poured concrete foundation walls. DECO 20 Seal Waterproofing Membrane is designed for use as a waterproofing coating when hydrostatic pressure caused by the water table does exist.
DECO 20 - DAMPPROOF COATING DECO 20 Dampproof Coating is an approved dampproof material used as an alternative to bituminous and asphalt based coatings. DECO 20 Dampproof Coating is designed to prevent moisture intrusion in poured concrete, cast in place, parged and non- parged block, pre-cast and ICF basement foundations.

DECO PRODUCTS INC

DECO NORTHEAST LLC